Description
Item Details:
RADNOR™ 1.99" Standard Duty Brass Gas Diffuser is ideal to use with up to 250 A Tweco® No. 2 as well as RADNOR™ Pro MIG guns. Diffuser is designed in a way so it can be used with slip-on nozzle assemblies and made from 360-brass alloy bar stock that assures consistent dimensional stability. Light to medium duty welding applications can make use of this diffuser.
Features
- Easy identification - part no rolled stamped on the outside surface
- Contains a conduit set screw used to hold the conduit liner in place
- Machined from 360 brass alloy bar stock to ensure consistent dimensional stability
- Designed to be used with Slip-on nozzle assemblies
- A machined thread is on the outside surface to allow the nozzle insulator to thread over holding the Slip-on nozzle in place during the welding process
- Recessed Tips are generally used for higher heat applications where longer electrical stick-out is required, or in cases where the nozzle may touch the work piece (tack, spot, and stitch)
- Flush Tips are generally used where a shorter electrical stick-out is used sometimes resulting in shorter/tighter arc lengths, this brings the tip closer to the work piece
- Protruding Tips are generally used when welding open root pipe or any joint that requires the welder to get into a tight weld joint
- However the down side to this is the chance of arcing the tip to the work piece, which could damage front end parts resulting in downtime needed to replace
Applications
- Used in light to medium duty welding application up to 250 Amp
- Use with thread on nozzle assemblies
Product Attributes:
| Attribute | Value |
|---|---|
| Consumables Type | Gas Diffuser |
| MIG Gun Model | RADNOR™ Pro 250 |
| Tweco® No. 2 | |
| MIG Wire Size | .030 - .062" |
| Length | 1.99" |
| Series | 14 |