Description
These light weight 18-gauge seamless knit gloves deliver excellent dexterity and tactile sensitivity. PosiGrip MAX™ palm coating requires less gripping force in dry and oily conditions while delivering excellent tactility for workers who handle small parts. Ideal for work in oily conditions with featured PosiGrip MAX™ near 0% oil penetration.
- Seamless construction offers increased comfort and breathability
- Nylon/spandex liner is soft, flexible and comfortable
- Proprietary PosiGrip MAX™ coating reduces required gripping force by up to 35% in dry/ oily conditions and provides enhanced tactility for handling small parts
- PosiGrip MAX™ coating boasts near 0% oil penetration for safer skin and a reduced rate of glove changeouts from oil exposure
- Touchscreen compatible to allow the user to operate a touch screen phone or device without removing gloves
- Knit wrist helps prevent dirt and debris from entering the glove
- The Oeko-Tex® Association has evaluated and certified this product as skin safe from the second it comes into contact with the skin
- Cut Level: A1
Test Method: ASTM F2992-15
- Puncture Level: 2
Test Method: ASTM F1342
- Abrasion Level: 4
Test Method: ASTM D3389-10
ANSI/ISEA has released a new edition of the ANSI/ISEA 105 standard (2024 ed). The changes include a new standardized glove label for easier identification of key protection levels for both distributors and end-users. The new pentagon marking was created to simplify and standardize the identification of protective glove performance levels, including abrasion, cut, and puncture resistance. By consolidating this information into a single, easily recognizable label, it improves usability for workers and reduces the risk of selecting inadequate protection.
- Cut Level: A1
- Test Method: ASTM F2992-15
New edition ANSI/ISEA 105-2024 outlines a new test method for determining cut scores and a revised scale from A1-A9
- Abrasion Level: 4
- Test Method: ASTM D3389-10
The ANSI/ISEA 105-2024 standard outlines test methods for abrasion and is scored from 0-6. The ASTM D3389-10 is used for uncoated gloves and the end point (failure) is the number of abrasion cycles when the first thread or yarn is broken. The larger numbers of cycles indicates greater abrasion resistance of the product and a higher Abrasion Level.
- Puncture Level: 2
- Test Method: ASTM F1342
The ANSI/ISEA 105-2024 blunt force puncture testing uses a probe to simulate a tear or burst hazard. The test measures the amount of force needed for a blunt probe to pierce through PPE material. Results are given in Newtons, which is converted into a 1-5 scale and spans from 10 newtons (Level 1) to 150+ newtons (Level 5) of puncture resistance.
- EN 388 2016 Results: 4131X
- Abrasion: 4
- Cut (Coupe Test): 1
- Tear: 3
- Puncture: 1Cut (TDM-100 Test): X
- Impact Protection:
EN 388 is a European Standard. Cut Level is determined by the number of cycles it takes a spinning circular blade, that is pulled across the material under a constant weight of 500 grams, to cut the fabric. As the number of cycles increase, so does the glove's ratings.
- Protective Gloves Against Thermal Hazards: X1XXXX
- Resistance to Flammability: X
- Contact Heat Resistance: 1
- Convective Heat Resistance: X
- Radiant Heat Resistance: X
- Resistance to Small Splashes of Molten Metal: X
- Resistance to Large Splashes of Molten Metal: X
EN 407 is a general European standard designed to be used for any glove that is to be sold as providing protection against thermal hazards. All six tests are graded on a scale from 0 to 4, with 0 signifying that the glove failed the test, and 4 demonstrating it has achieved the maximum resistance in that specific area.