Honeywell PR500 Series Powered Air-Purifying Respirators (PAPR)

NORTH Safety Products

$682.50 
SKU: NOSPR501S

NOTE: SPECIAL ORDER ITEM - May Require a 2-week processing time.

The Honeywell PR500 Series Face-Mounted Powered Air-Purifying Respirator (PAPR) uses a blower unit to force ambient air through a single High Efficiency Particulate Air-Purifying (HEPA) filter to remove contaminants and provide clean air to the user.

Includes 5-Point Headstrap with battery and blower only. FILTERS NOT INCLUDED (sold seperately)

Using the nozzle adapter that is included with the Honeywell PR500 Series, the PAPR blower assembly mounts directly to the center port of the RU6500.

Protection Type:
This respirator is ideally suited for applications where nonpowered air-purifying respirators are not practical or a higher protection factor is required, yet where the atmospheres are not immediately dangerous to life or health (IDLH). The PR500 Series Face-Mounted PAPR is recommended for respiratory protection against dusts, fumes and mists, particulate radionuclides, radon progeny attached to dusts, fumes and mists.

Certifications:
When components listed on the NIOSH Approval Label are used, these respirators are approved as part of a Powered Air-Purifying Respirator.

Assigned Protection Factors:
The PR500 Series PAPR is for protection from particulates where (i) the concentration does not exceed the Permissible Exposure Limit (PEL) as determined by the Assigned Protection Factor (APF) of the facepiece used with the PAPR, (ii) the concentration is below the contaminant’s Immediately Dangerous to Life or Health (IDLH) level, and (iii) there is sufficient oxygen in the work environment according to the OSHA Regulation 29 CFR Section 1910.134 or CSA Standard Z94.4 requirements.

The APF for the PR500 Face-Mounted PAPR is 1,000.