Phone: 626-369-1280 | Toll-Free: 866-693-3754 | Fax: 626-369-1262 | 7:00AM - 4:00PM PST, Monday to Friday

3M DBI-SALA Small PROTECTA PRO Welder's Vest Style Harness With Back D-Ring And Tongue Buckle Leg Strap

SKU : D621191371
3M DBI-SALA Small PROTECTA PRO Welder's Vest Style Harness With Back D-Ring And Tongue Buckle Leg Strap


3M DBI-SALA PROTECTA PRO Small Red/Black Vest-Style Capital Safety Welders Harness is made of modacrylic over Kevlar that withstands 420 lb user weight capacity. Welders harness is specifically lightweight design that provides improved comfort and is used in welding applications that offers heat and char resistance. It comes with back D-rings and fall arrest indicator that correctly indicates when product is involved in a fall and when it needs to be removed from service. It has web with lanyard storage keepers that minimize potential entanglement hazards.


  • Back D-ring - provides a safe connection for your fall arrest system and keeps you upright every time
  • Tongue buckle leg straps - easy to use tongue and grommet style leg straps for fast adjustments
  • Heat resistant and flame retardant webbing - lightweight and strong modacrylic over Kevlar, and polyester webbing provides durability and a 700 degree fahrenheit char temperature
  • Built-in lanyard keepers - ideal to hold or park your unused lanyard snap hooks while not in use to avoid trip hazards
  • Parachute torso adjusters - completes the 5-point adjustment system for a perfect fit
  • Impact indicator - rip-stitch indicators allow you to inspect the harness at a glance, for prior damaging impact loads
  • Protected labels - a Velcro cover protects identification, inspection and warning labels from the elements for added longevity


  • ANSI Z359.1-2007
  • OSHA 1926


  • Welding
  • Confined space
  • Fall from height
  • Welding flash


  • Only Capital Safety is authorized to make repairs or modifi cations to this equipment
  • Any attempt to modify or repair equipment by the user will void the warranty and could cause injury or death
  • If a full body harness is subject to an impact load or has arrested a fall, it should be removed from service and destroyed by cutting the webbing into pieces
  • Even if the impact indicators on the harness do not appear to have deployed, the harness must be removed from service, destroyed, and replaced

Item has not been reviewed. Be the first to write a review for this item