Work Gloves

Features a clute pattern, nap out, and white knit wrist.

Clute Pattern with Wing Thumb and Blue Knit Wrist Work Gloves.

13" long, 18 mil unsupported Neoprene™ gloves provide excellent resistance to a wide range of chemicals, including oils, acids, caustics and solvents. Case hardened for increased abrasion and chemical resistance. Embossed finish for better gripping power. Sold per pair. Excellent Chemical Resistance!

Presenting a Kinder, Gentler, Tougher Glove. There’s a lot to like about our new ArmorKnit gloves and sleeves. We’ve used DuPont’s new Kevlar® Armor technology to make the most comfortable and cost effective products on the market. ArmorKnit gloves are ideal for work environments that demand tough protection from sharp, jagged edges, and sparks and flames, without sacrificing comfort and flexibility. Ansell’s solution is 100% Kevlar Armor and 100% standard Kevlar blend. Studies have shown that our new ArmorKnit mediumweight gloves provide 62% more cut resistance than standard mediumweight cut-resistant gloves, and 45% more cut resistance than standard heavyweight gloves. If you’re looking for heavyweight protection with a lightweight feel - look no further than Ansell’s ArmorKnit product offerings.

When you work with hazardous chemicals or dangerous liquids, you can't afford any kind of slip. That's why the AlphaTEC glove features the revolutionary Ansell Grip Technology™. Our patent- pending nitrile layer is filled with microscopic channels that actively repel oils and other lubricants, giving you nearly the same grip you would have in fluid-free conditions. Combined with an advanced ergonomic design, the AlphaTEC glove greatly increases control and comfort, significantly reducing fatigue and CTS-related injuries.

Neox® Neoprene-Coated, Interlock Knit-Lined The neoprene coating on Neox gloves provides better all-around resistance to cuts, abrasions, and chemicals than most other glove coatings, while the interlock knit cotton lining enhances puncture and snag resistance. Curved fingers and a wing thumb provide a natural fit and greater comfort, and the two-piece lining eliminates irritating seams.

The Ansell Canners And Handlers Medium Duty Glove features natural, unsupported, 20 mil. latex. The unlined 12" glove is equipped with a fishscale grip and a pinked cuff.

Crusader Flex Nitrile-Coated Hot Mill Work Gloves-For the best protection and comfort in moderate heat applications, Crusader Flex gloves are the answer. Non-woven felt insulation and a full-length heat barrier protect the worker, while two-piece construction eliminates outseams to provide better finger comfort, dexterity, and flexibility.

Where dexterity is the key factor, HyFlex Lite with its polyurethane coating, is the perfect choice. It is ideal for the electronics industry.

Sol-Vex® unsupported, premium-quality gloves are made of a high-performance nitrile compound which provides an outstanding combination of strength and chemical resistance. When exposed to aromatic and petroleum solvents, as well as caustics and animal fats, Sol-Vex gloves have proven to be a superior choice over rubber or neoprene. Sol-Vex gloves won’t swell, weaken, or degrade, and they offer better protection against snags, punctures, abrasions, and cuts. And, as added benefits, Sol-Vex gloves do not promote contact dermatitis, and their component materials comply with FDA regulations for food contact.

HyFlex® 11-920 Gloves use patented Ansell Grip Technology (AGT) that enables workers to effectively grip wet or oily objects with significantly less force. AGT creates a roughened surface of microscopic channels in an ultra-thin nitrile coating on the outside with a barrier of nitrile on the inside.

Natural Blue™ gloves are 17 mil thick for superior tactile sensitivity and dexterity, as well as good chemical, snag, puncture, abrasion and cut resistance. Made with component materials that comply with FDA regulations for food contact, the gloves feature a patterned grip and a conspicuous blue color.

Size 7 Small
Size 8 Medium
Size 9 Large
Size 10 X-Large

Power Flex Plus provides cut, abrasion, and puncture resistance; superior wet and dry grip; and unbelievable comfort. The gloves are ergonomically designed and feature a seamless Kevlar® knit lining that’s palm-dipped with a textured, natural rubber coating. The uncoated back allows air to circulate which keeps hands cooler and drier, and the fully coated thumb provides added protection in this high-risk area.

A tough chemical resistant neoprene coating provides excellent chemical resistance to oils, acids, caustics, and solvents as well as protection from cuts, abrasion and punctures. Scorpio® has a rough-textured finish which makes handling wet, slippery materials safer and easier. Two-piece interlock liner. Curved, preflexed fingers and wing thumb. Sold per pair.

PowerFlex Tº Hi Viz Yellow gloves offer high visibility with their yellow thermal terry liner while the bright blue crinkled palm provides added grip. Gloves offer excellent insulation for temperatures as low as - 25ºC or -13ºF. This latest addition to the PowerFlex family has an ergonomic design, which allows for unmatched comfort.

Ansell's Vantage® series integrates revolutionary engineered yarns to provide increased cut protection without the bulk! These gloves deliver maximum safety without sacrificing dexterity, durability or comfort. They are ideal for work environments where sharp tools and materials are handled. Due to an exclusive blend of fibers and a unique manufacturing process, Vantage® gloves are lightweight and comfortable, increasing employee compliance and reducing potential for injury. Built with Ansell's proprietary cut resistant technology, no other glove is this comfortable, protects this well or lasts this long.

Ansell's Vantage® series integrates revolutionary engineered yarns to provide increased cut protection without the bulk! These gloves deliver maximum safety without sacrificing dexterity, durability or comfort. They are ideal for work environments where sharp tools and materials are handled. Due to an exclusive blend of fibers and a unique manufacturing process, Vantage® gloves are lightweight and comfortable, increasing employee compliance and reducing potential for injury. Built with Ansell's proprietary cut resistant technology, no other glove is this comfortable, protects this well or lasts this long. Heavyweight, loop-in terry cloth - Level 4, 3225g. Designed for the toughest applications requiring very high cut protection/durability and extra cushioning.

Golden Grab-It® Rubber-Coated, Crinkle-Finish Golden Grab-It gloves outperform leather and ordinary rubber-coated gloves on many jobs. Their crinkle finish provides a safer grip in wet or dry conditions, plus greater cut resistance and improved cushioning of the hands.

Best® Ultraflex™ II Neoprene® Gloves feature a two piece interlock liner with a durable and abrasion resistant rough finished Neoprene® coating. They can withstand complete submersion in a wide range of chemicals, yet remain flexible and keep an excellent wet grip. With gauntlet cuffs, Ultraflex™ II Neoprene® gloves are nearly as flexible as unsupported gloves for applications such as turning valves, analyzing samples, cleaning equipment and electronics. Made in USA. In compliance with 21CFR 170-199. Sold by pair.

Best® Nitri-DX™ uses 9 mil unlined 100% Nitrile, low modulus hybrid-formulation with a tractor-tread grip. Durable chemical resistance with the low-modulus feel associated with our patented NDex. Hand specific packaging for less waste. Proudly manufactured in the USA