MSA - V-Gard - Fas Trac Suspension Hard Hat Safety Helmet

V-Gard Protective Caps and Hats from MSA consist of a polyethylene shell and suspension system working together as a protection system. V-Gard head wear features advanced styling in either cap or hat styles, with the cap available in three sizes: small (6 - 7 1/8), standard (6 1/2 - 8) and large (7 - 8 1/2). V-Gard Caps and Hats meet or exceed the applicable requirements for a Type I helmet (top impact) as outlined in ANSI Z89.1 1997,Class E and G.

• MSA’s Vanguard Type II protective helmets are so designed and must be used if lateral protection is desired
• Do not mix suspension and helmet size. Make sure the sizes match use only MSA suspensions on an MSA caps or hats. Failure to comply will reduce the energy-absorbing ability of the protective hat or cap.
• Use only MSA suspensions on an MSA helmet. Failure to comply with the above will reduce the energy-absorbing ability of the protective helmet, which can result in serious injury or death
• V-Gard Caps and Hats are not specifically designed to protect against lateral blows from the front, side, or rear

• Meet or exceed the applicable requirements for a Type I helmet (top impact) as outlined in ANSI Z89.1 1997,Class E and G

• Agriculture
• Asbestos Abatement
• Chemical
• Construction
• Domestic Preparedness
• Electric Utility
• Hazardous Materials
• Indoor Air Quality
• Medical
• Mining
• Nuclear
• Oil & Gas
• Paper & Pulp
• Sand Blasting
• Sanding & Grinding
• Spray Painting
• Water/Waste water
• Welding

• ANSI Type: I
• Cap Class: E, G
• Cap Type: Hard Cap
• Color: White, Yellow, Blue, Red, Green, Hi-Viz Orange
• Material: Polyethylene
• Suspension: Ratchet